Halo is a laboratory air purifier for chemical odors even when lab people use hoods and storage cabinets in the laboratory. By adsorbing chemical molecules through the carbon filter, it continuously filters the air in the laboratory. Because it is installed on the ceiling, it does not take up space and the air filtration performance is excellent due to the Coanda effect. LEDs mounted on Halo's four sides indicate that the laboratory air is chemically contaminated and blinks to indicate the lab air condition.Users can easily check Halo's status and change settings with a smartphone.
moreEXHIBIT
Chemtrap for safety cabinet
Chemtrap circulates clean air into the lab by filtering hazardous chemicals in flammable cabinets through filters without duct connections. The new Chemtrap can filter gas and powder at the same time, so both carbon filters and HEPA filters can be installed. Erlab is the world leader in filter chemical filtration, guaranteeing 100% filtration efficiency over the life of the filter. Erlab's 50 years of testing at the R&D lab can expect filter lifetime.
MoreInstrument Enclosure
IE is a customized enclosure for instruments. It can be used for all instruments generating chemicals and dust. A carbon filter can be equipped two layers, and a HEPA filter can also be euipped. Erlab has been testing the adsorption of filters on chemicals for 50 years, so they have extensive technical datas. These datas can expect the filter replacement life time. The front and rear sliding doors provide easy access and there is an entry port for the cable hose.
MoreFiltering storage cabinet Smart 834
Smart 834 complies with the hood filtration efficiency standard AFNOR MFX 15 211. Erlab has an R&D lab and has been testing filter adsorption capacity of chemicals for 50 years. Based on these data, erlab can let us know filter lifetime of Smart 834. Since it is not a completely enclosed type, air of 2m around is sucked into the enclosure and discharged as clean air through a filter, so it has an effect of purifying the air around the Smart 834.
MoreGreen Fume Hood GFH5300
GFH 5300 allows easy installation of the hood without duct construction and is suitable for R&D labs as the filter type is not divided according to the handling type and almost all experiments are possible with one type filter. The filter can adsorpt about 1.5-2 times the conventional filters adsorption capacity. Erlab developed the ductless fume hood for the first time in the world and Erlab can provide technical data which have tested filter adsorption of each chemicals.
MoreCOMPANY INTRODUCTION
Halo is a laboratory air purifier for chemical odors even when lab people use hoods and storage cabinets in the laboratory. By adsorbing chemical molecules through the carbon filter, it continuously filters the air in the laboratory. Because it is installed on the ceiling, it does not take up space and the air filtration performance is excellent due to the Coanda effect. LEDs mounted on Halo's four sides indicate that the laboratory air is chemically contaminated and blinks to indicate the lab air condition.Users can easily check Halo's status and change settings with a smartphone.