C&G University provides equipment and solutions in Korea in cooperation with leading overseas production equipment manufacturers. The representative product is BERTOLI's high-pressure dispersion (homogenizer), which is used to manufacture and disperse nanoparticles such as CNT, graphene, graphite, and silicon used in battery cathode and anode materials. It is universally used to efficiently disperse various samples and high-content samples that were previously difficult to disperse using high pressure. It is an equipment that homogenizes, disperses, and emulsifies samples at a pressure of up to 4000 bar. Through special technology, it is possible to use ultra-high pressure of 4000 bar and adjust the pressure through nano gap. In addition, we directly install and provide after-sales service for solid and wet grinders, mixers, high viscosity pumps, spray dryers, spray dryers, and centrifuges used to handle various chemical samples. Translated with DeepL.com (free version)
moreEXHIBIT
Centrifuge
Perform solid-liquid separations and solid-liquid three-phase separations with disk/tubular/batch centrifuges. Separate, purify, and clarify samples using different types of centrifuges to match your samples.
More
Flash/Spray Dryer
Riera Nadeu's spray/flash dryers are production equipment for drying liquids and slurries to a powder state. Spray dryers atomize particles through specialized nozzles adapted to the product, where they meet hot air for drying. Flash dryers dry particles through circulation and collision with particles in a specially designed toroidal chamber.
More
Jet Mill
A jet mill (=air jet mill) is a dry mill that uses air jets to grind particles down to 10um or smaller. Particles on the order of hundreds of micrometers are ground by particle-to-particle collisions in a chamber. The special design of the chamber and the fact that the grinding is done through the jet ensures that there is no contamination of the sample. It can also grind particles uniformly to a particle size between 1 and 10 um.
More
Colloid Mill
A colloid mill is a wet milling equipment that disperses, homogenizes and grinds particles up to several hundred microns and beyond. The reduction of the sample is achieved by a stator and rotor with specially designed triple blades. The gap between the stator and rotor can be adjusted from a maximum of 400um to a minimum of 50um, allowing the user to control the particle size to the desired degree. Models are available for discharge rates from 3,000 liters per hour up to 25,000 liters per hour.
More
High Pressure Homogenizer
A high pressure homogenizer is a machine that disperses, homogenizes, emulsifies, and wet-mills particles. It can disperse particles as small as microns up to tens of nanometers. Bertoli's high pressure disperser uses three piston pumps to force the sample through a nano-gap, exposing it to high pressure to disperse it. The pressure can be adjusted to high pressures of up to 4000 bar, and there is a wide range of models with adjustable throughput from 3 to 80,000 liters per hour. In addition, th
More
COMPANY INTRODUCTION
C&G University provides equipment and solutions in Korea in cooperation with leading overseas production equipment manufacturers. The representative product is BERTOLI's high-pressure dispersion (homogenizer), which is used to manufacture and disperse nanoparticles such as CNT, graphene, graphite, and silicon used in battery cathode and anode materials. It is universally used to efficiently disperse various samples and high-content samples that were previously difficult to disperse using high pressure. It is an equipment that homogenizes, disperses, and emulsifies samples at a pressure of up to 4000 bar. Through special technology, it is possible to use ultra-high pressure of 4000 bar and adjust the pressure through nano gap. In addition, we directly install and provide after-sales service for solid and wet grinders, mixers, high viscosity pumps, spray dryers, spray dryers, and centrifuges used to handle various chemical samples. Translated with DeepL.com (free version)